LURELOVERS™ Australian Fishing Lure Community Homepage
Forum Home Forum Home > Australian Lures > NSW Lures > Peter Newell
  New Posts New Posts
  FAQ FAQ  Forum Search   Events   Register Register  Login Login

Newell/Powell/Newell Scorpions

 Post Reply Post Reply
Author
Message
Powelly View Drop Down
Stall Holder
Stall Holder
Avatar
Powell Lures

Joined: 16 Feb 2010
Location: Port Macquarie
Status: Offline
Points: 2196
Post Options Post Options   Thanks (0) Thanks(0)   Quote Powelly Quote  Post ReplyReply Direct Link To This Post Topic: Newell/Powell/Newell Scorpions
    Posted: 09 Feb 2011 at 8:47pm
For those members who have read the "Powell Lures Story", you'll be aware of the friendship that I had with Peter Newell, his help with my lure making and his generosity.  About 21 years ago, Peter gave me a couple of boxes of Scorpion blanks, ranging from cut-out blanks to fully carved and sanded blanks.  Many of them I only needed to glue in the eyelets and bibs and then paint them  -  quite a few of them Peter painted for me.
 
Most of the Scorpions that I made from these blanks were given to friends and family, so I don't have too many left.  I had a bit of a dig around today and took photos of what I could find.
 
The photo, below, shows the huge variation in shape of the Scorpion. The longest (blue) lure has a body length of 165mm.
 
 
Some of the original blanks.
 
 
The lures below are ones that Peter has given me, either as a finished/painted lure or as a finished/unpainted lure.  The 2 plastic RMG Scorpions were painted by Peter as was the original, old mustard/green scale Scorpion with the corrugated bib.
 
 
Because of my love of trout fishing, I make the odd 2" Scorpion.  The bottom 2 lures were made in my last batch of lures.  The top 3 lures were made many years ago. The nude and white/silver scale ones were made last year.
 
 
So there they are. Not 100% true blue Newells, and probably have no collector value, but hopefully they provide a bit more information for those members collecting Scorpions.  They are, obviously, very important to me and the friends/relatives have now been crossed off the 'sharing' list, when it comes to these Scorpions.Big smile
 
Travers
Back to Top
fishing man View Drop Down
Senior Member
Senior Member
Avatar

Joined: 21 Dec 2009
Location: Ipswich
Status: Offline
Points: 183
Post Options Post Options   Thanks (0) Thanks(0)   Quote fishing man Quote  Post ReplyReply Direct Link To This Post Posted: 09 Feb 2011 at 8:56pm
interesting stuff Travers, always enjoy your posts.
Love the pics too :)
Cheers



Ben
Back to Top
Darby View Drop Down
Stall Holder
Stall Holder
Avatar
Fishaholic Lures

Joined: 29 Nov 2009
Location: Brisbane
Status: Offline
Points: 7477
Post Options Post Options   Thanks (0) Thanks(0)   Quote Darby Quote  Post ReplyReply Direct Link To This Post Posted: 09 Feb 2011 at 9:10pm
Travers, is there a reason for the sharp 'kink' in the belly. I have seen it on a number of Scorps with the narrow pointy bib, but not so common on the round bib ones. Was it more for the salty trollers and the gentle kink for the freshwater lures that are worked slower???

Brad
"If you are going to have fun with your rod.. get some wood



Back to Top
Alistair View Drop Down
LureLovers.com Guide
LureLovers.com Guide
Avatar
Beta Tester

Joined: 10 Nov 2009
Location: Casino
Status: Offline
Points: 4385
Post Options Post Options   Thanks (0) Thanks(0)   Quote Alistair Quote  Post ReplyReply Direct Link To This Post Posted: 09 Feb 2011 at 9:41pm
Hybred lures are something that I think are pretty speciel where it brings 2 lures makers skills togetherClap
Alistair.

Comfort the disturbed - Disturb the comfortable.
Back to Top
bassnbob View Drop Down
Stall Holder
Stall Holder
Avatar
B.O.B Timber Lures

Joined: 22 Nov 2009
Location: Charlestown
Status: Offline
Points: 9390
Post Options Post Options   Thanks (0) Thanks(0)   Quote bassnbob Quote  Post ReplyReply Direct Link To This Post Posted: 10 Feb 2011 at 12:21am
SO nice to have5 THANKS POWELLEY you stinky old pine snifferLOLWinkWinkCoolCoolApproveApproveApproveREGARDS   BOBBig smile
Back to Top
reelsandlures63 View Drop Down
LureLovers.com Fanatic
LureLovers.com Fanatic


Joined: 19 Jan 2011
Location: townsville
Status: Offline
Points: 1243
Post Options Post Options   Thanks (0) Thanks(0)   Quote reelsandlures63 Quote  Post ReplyReply Direct Link To This Post Posted: 10 Feb 2011 at 5:37am
That is an amasing collection travers,one that any collector would be very proud of thanks very much for sharing the pics with us.stevenWink
Back to Top
deceptiondude View Drop Down
Ex Member.
Ex Member.
Avatar
Serial Troll

Joined: 30 Oct 2010
Location: NSW
Status: Offline
Points: 21
Post Options Post Options   Thanks (0) Thanks(0)   Quote deceptiondude Quote  Post ReplyReply Direct Link To This Post Posted: 10 Feb 2011 at 6:05am
g'day powelly,
the top 2 lures in the 2nd last pic look like they have writing 'embossed' into the bottom of them.

are they moulded?

they're the only 2 i can see in your impressive collection with these marks.
Back to Top
Brolly View Drop Down
Senior Member
Senior Member
Avatar

Joined: 25 Nov 2009
Location: Thagoona Qld
Status: Offline
Points: 437
Post Options Post Options   Thanks (0) Thanks(0)   Quote Brolly Quote  Post ReplyReply Direct Link To This Post Posted: 10 Feb 2011 at 7:20am
G'day Powelly,that is sure a fantastic bunch of Scorpions you have and it shows a variety of shapes and paint patterns,Love Em ClapClapClap
FISHING JUSTS GETS IN THE WAY OF MY LURE COLLECTING
Back to Top
Aussbasstony View Drop Down
LureLovers.com Fanatic
LureLovers.com Fanatic
Avatar

Joined: 04 Jan 2010
Location: Gold Coast
Status: Offline
Points: 2410
Post Options Post Options   Thanks (0) Thanks(0)   Quote Aussbasstony Quote  Post ReplyReply Direct Link To This Post Posted: 10 Feb 2011 at 7:42am


Hey Travers, who let you out of your shed Tongue

Great pictures mate and thanks for posting, but love the last little Quote you put on your post LOL

Cheers Tony 
Back to Top
edzard View Drop Down
Stall Holder
Stall Holder
Avatar
Ollie's Stingrays

Joined: 20 May 2010
Location: Mt Crosby,Qld
Status: Offline
Points: 581
Post Options Post Options   Thanks (0) Thanks(0)   Quote edzard Quote  Post ReplyReply Direct Link To This Post Posted: 10 Feb 2011 at 7:50am
Very nice Travers59great looking lures, thanks for sharing them with us.
Cheers
Ollie
Back to Top
tooch View Drop Down
LureLovers.com Fanatic
LureLovers.com Fanatic
Avatar
Twitchy Lures

Joined: 02 Mar 2010
Location: windsor nsw
Status: Offline
Points: 3450
Post Options Post Options   Thanks (0) Thanks(0)   Quote tooch Quote  Post ReplyReply Direct Link To This Post Posted: 10 Feb 2011 at 8:32am
Nice lures Travers, Your the master....You can't get much better than that...SmileSmileSmileSmile...Pete
I'd rather be fishing with





Back to Top
Alistair View Drop Down
LureLovers.com Guide
LureLovers.com Guide
Avatar
Beta Tester

Joined: 10 Nov 2009
Location: Casino
Status: Offline
Points: 4385
Post Options Post Options   Thanks (0) Thanks(0)   Quote Alistair Quote  Post ReplyReply Direct Link To This Post Posted: 10 Feb 2011 at 12:56pm
Originally posted by deceptiondude deceptiondude wrote:

g'day powelly,
the top 2 lures in the 2nd last pic look like they have writing 'embossed' into the bottom of them.

are they moulded?

they're the only 2 i can see in your impressive collection with these marks.
 
You must of missed what Travers said in his post
 
"The lures below are ones that Peter has given me, either as a finished/painted lure or as a finished/unpainted lure.  The 2 plastic RMG Scorpions were painted by Peter as was the original, old mustard/green scale Scorpion with the corrugated bib."
 
 
 
Alistair.

Comfort the disturbed - Disturb the comfortable.
Back to Top
Powelly View Drop Down
Stall Holder
Stall Holder
Avatar
Powell Lures

Joined: 16 Feb 2010
Location: Port Macquarie
Status: Offline
Points: 2196
Post Options Post Options   Thanks (0) Thanks(0)   Quote Powelly Quote  Post ReplyReply Direct Link To This Post Posted: 10 Feb 2011 at 6:26pm
I knew I shouldn't have put those plastic lures in with the timber ones!Wink
 
This is the only fair dinkum, 100% Newell Scorpion that I own. Built,painted and signed by Peter.  Pete gave it to me in 1989.
 
 
 
 
 
The old girls been chucked around a few Tenterfield creeks and dragged through Glenlyon Dam a few times, so it's loosing the 'signing' and a bit of it's original gloss.Cry
 
Travers
Back to Top
deceptiondude View Drop Down
Ex Member.
Ex Member.
Avatar
Serial Troll

Joined: 30 Oct 2010
Location: NSW
Status: Offline
Points: 21
Post Options Post Options   Thanks (0) Thanks(0)   Quote deceptiondude Quote  Post ReplyReply Direct Link To This Post Posted: 10 Feb 2011 at 7:37pm
nah mate they're all good!

I just didnt read it properly too busy loooking at the lures!
Back to Top
Powelly View Drop Down
Stall Holder
Stall Holder
Avatar
Powell Lures

Joined: 16 Feb 2010
Location: Port Macquarie
Status: Offline
Points: 2196
Post Options Post Options   Thanks (0) Thanks(0)   Quote Powelly Quote  Post ReplyReply Direct Link To This Post Posted: 21 May 2011 at 10:13am
I was looking through some photos last night and came across this one.
 
It's the Lure Display that I use at the Maitland 4WD Show.  The photo would be from 2002 or 2003 - bought my first digital camera in 2002.
 
I've just found my old Sales Records, for the 4WD Shows (which will be on next weekend) & Maitland Craft Fair and thought you may be interested in the price and numbers of Scorpions that were sold.
 
The price was $15Cry - same price for the 4 years (1999 - 2002) that I sold them at these shows.
 
1999 Maitland Craft Fair      -     Had 3 Scorpions for sale, sold 2
1999 Maitland 4WD Show   -     Had14 Scorpions for sale, sold 4
2000 Maitland Craft Fair      -     Had 6 Scorpions for sale, sold 0
2000 Maitland 4WD Show   -     Had 6 Scorpions for sale, sold 0
2001 Maitland Craft Fair      -     Had 4 Scorpions for sale, sold 0
2001 Maitland 4WD Show   -     Had 4 Scorpions for sale, sold 4
2002 Maitland 4WD Show   -     Had 8  2" Scorpions for sale @ $8, sold 2
 
The lack of interest in the Scorpions was more a reflection of the type of people that come to the Caravan, Camping, 4WD, Fishing and Boat Show - mainly families, looking at camping gear and camper vans.  Not too many serious fishermen, looking for timber lures!  I wish, now, that I'd kept them!
 
Many of the Scorpions that weren't sold were given to mates.  Malcolm Douglas ended up with some, via a mate who handed the ones that I'd given to him.
 
I've started making a few Scorpions, recently, but they won't be selling for $15!
 
Cheers
 
Travers
Back to Top
Alistair View Drop Down
LureLovers.com Guide
LureLovers.com Guide
Avatar
Beta Tester

Joined: 10 Nov 2009
Location: Casino
Status: Offline
Points: 4385
Post Options Post Options   Thanks (0) Thanks(0)   Quote Alistair Quote  Post ReplyReply Direct Link To This Post Posted: 21 May 2011 at 10:42am
Why wont they be sold for $15? (or similar on par $$$ with normal fishing lures)  Are the ones you are making just a few for the collectors market or will you be making them as part of your general fishing lure line up? I personally would like to have a maker doing up some scorpions to be used as fishing lures as I cant see myself using my Newell's on the next barra trip but obviously the lures would need to be priced, well ... as fishing lures. Might end up making my own in the end I guess. One thing I would encourage anyone making copies of lures would be to either make something different about them or sign them under the clear coat to save any mistaken identity down the track. We only saw that recently with the Scorpion lure you painted many many moons ago that was mistaken to be a Newell. Obvious to many it was your paintjob but as new colectors come on the scene it can get confusing for them.  
Back to Top
Powelly View Drop Down
Stall Holder
Stall Holder
Avatar
Powell Lures

Joined: 16 Feb 2010
Location: Port Macquarie
Status: Offline
Points: 2196
Post Options Post Options   Thanks (0) Thanks(0)   Quote Powelly Quote  Post ReplyReply Direct Link To This Post Posted: 21 May 2011 at 11:22am
G'day Alistair.
 
My advice to anyone looking for cheap lures is to make the lures themselves.  The Scorpion is a relatively difficult lure to carve - certainly a lot more difficult than a standard minnow shape - and I am not intending to sell them at 10 year old prices.  Personally, I don't think $15 for any hand carved lure is a sustainable price, but it's a competitive world. Look how many lure makers have got out of the industry because of the poor return for a lot of quality work.
 
I don't intend to make many. I've been making a few for a bloke who wants timber Scorpions and is happy to pay a fair price for them. I've enjoyed making them and thought that I'd make a few more.
 
Not a bad idea to mark the lures in some way to distinguish them from the originals.  As you know, I've never tried to pass my lures off as Peter's so, maybe, a TP on the arse might be a good move.  As I said, I don't expect to make many.
 
Cheers
 
Travers
Back to Top
doccod View Drop Down
LureLovers.com Fanatic
LureLovers.com Fanatic
Avatar
B.J.'s Spinnerbaits

Joined: 07 Feb 2010
Location: Harrington, N.S
Status: Offline
Points: 1324
Post Options Post Options   Thanks (0) Thanks(0)   Quote doccod Quote  Post ReplyReply Direct Link To This Post Posted: 21 May 2011 at 12:26pm
WinkGreat posts here and TERRIFIC scorpions travers,are the timber scorps you doing in the 75mm size with the painted metal bibs if so I'm prepared to pay for one or two down the track for me barra arsenal I'm slowly building at the moment! I yeah I think ALL your lures are collectable travers.......B.J.Wink
Back to Top
Alistair View Drop Down
LureLovers.com Guide
LureLovers.com Guide
Avatar
Beta Tester

Joined: 10 Nov 2009
Location: Casino
Status: Offline
Points: 4385
Post Options Post Options   Thanks (0) Thanks(0)   Quote Alistair Quote  Post ReplyReply Direct Link To This Post Posted: 21 May 2011 at 7:04pm
What is a fair price for a fishing lure? Personally I think that $15 - $20 for a small to medium timber lure is fair IMHO. I think once you go over the $20 mark people will pass a lure over (unless they are buying Japan made plastic sensations for mega $$$ which I think they have more $ than sense. From my understanding, lure makers selling to retails shops sell for roughly $8-$12 then the shop put on a markup of 100%.  I guess thats business. If lures are made for the collectors market though with higher $$$ in mind (and that is an issue I will bring up elsewhere) then I think that if they are a limited numbers or something else special then they can comand a higher price. Sometimes I think this gets taken advantage of though by some makers but I think we have seen this can turn against them in the long run.
 
I dont know if the Scorpion is much harder to make though, I knocked this 4 inch McSea Scorpion inspired Jack lure blank out whilst sitting on the beach with my very limited skills so a decent maker like yourself should be able to carve them out with your eyes closedWink 
 
 
Back to Top
Powelly View Drop Down
Stall Holder
Stall Holder
Avatar
Powell Lures

Joined: 16 Feb 2010
Location: Port Macquarie
Status: Offline
Points: 2196
Post Options Post Options   Thanks (0) Thanks(0)   Quote Powelly Quote  Post ReplyReply Direct Link To This Post Posted: 21 May 2011 at 10:53pm
As I said Alistair, you are much better off making your own lures. 
 
After 20+ years of lure making, I've moved on from trying to compete with cheap plastic lures.  Surely you can't expect hand carved lures to be cheaper than $15-$30 mass produced  plastic lures? In saying that, I still persist with hand carving lures and selling them at $12 to $15, because I need to be 'in the market'
 
It all comes back to the market forces of supply and demand. If the punters aren't prepared to pay the dollars, then the lures will not be sold.
 
The last thing that I need is a high demand for timber Scorpions, because I just don't have the time to carve them. 
 
Think about the reasons that Peter Newell, an others, chose to outsource their lure making to lathe turned lures and plastic lures.  Personally, I don't want to let the craft of hand carving lures die, so I'm prepared to carve limited numbers of lures each year.  It's a personal thing and it can be traced back to my friendship with Peter Newell and the advice that he gave me 20+ years ago.
 
Obviously, it's a bit difficult to understand where I'm coming from.  The last thing that I want to do is capitalise on Peter's successful designs but, unfortunately, they are not available in timber anymore and there are fishermen who want the original timber lures.  As with the Kaditchas, I don't plan on making these lures a mainstream lure, rather fill a very limited demand for the original timber lure.
 
I think Big W still sell the plastic Halco Scorpions for about $10.  Cheap as chips.
 
Cheers
 
Travers
 
 
Back to Top
Alistair View Drop Down
LureLovers.com Guide
LureLovers.com Guide
Avatar
Beta Tester

Joined: 10 Nov 2009
Location: Casino
Status: Offline
Points: 4385
Post Options Post Options   Thanks (0) Thanks(0)   Quote Alistair Quote  Post ReplyReply Direct Link To This Post Posted: 22 May 2011 at 12:43am
Originally posted by Powelly Powelly wrote:

 
I think Big W still sell the plastic Halco Scorpions for about $10.  Cheap as chips.
 
 
 
 
 
I have made it a rule not to buy the Halco Scorpions for my own reasons. Saying that, timber beats plastic as a lure most days in my experiance so the Halco lures dont really appeal to me anyway. 
 
I would like to add some Scorpions to my tackle box but as they would be purchased to be thrown into snags where they often wont come back it would need to be at a fishing lure price. As you said, perhaps I need to develope my carving skills and make my own. It gives me incentive at least.
Back to Top
barneyminno View Drop Down
LureLovers.com Fanatic
LureLovers.com Fanatic

Deep River Lures

Joined: 19 Apr 2011
Location: Esk. QLD
Status: Offline
Points: 1689
Post Options Post Options   Thanks (0) Thanks(0)   Quote barneyminno Quote  Post ReplyReply Direct Link To This Post Posted: 22 May 2011 at 8:12am

l agree with Travers , its a labour of love for most lure makers as you cant possibly expect to make a 'good living' doing it unless you go with machinery or go plastic.

For me , l have no problem paying $10-30$ for a handmade lure that appeals to me and is special/unique/well designed/artistic/highly creative/practical. lts not about what lm getting for the $$.... [you can buy 6 chinese lures for $30..] , but its about the lure being timber...and made by hand or hand/machine....by a person who has put thought and heart into it [there are lots of people here who do that!Smile].

The one major benefit of lathe cut lures is consistency...
l dont think l ever made two bodies the same!LOL
 
Anthony.
Back to Top
Powelly View Drop Down
Stall Holder
Stall Holder
Avatar
Powell Lures

Joined: 16 Feb 2010
Location: Port Macquarie
Status: Offline
Points: 2196
Post Options Post Options   Thanks (0) Thanks(0)   Quote Powelly Quote  Post ReplyReply Direct Link To This Post Posted: 22 May 2011 at 8:59am
Originally posted by Alistair Alistair wrote:

 
I have made it a rule not to buy the Halco Scorpions for my own reasons. Saying that, timber beats plastic as a lure most days in my experiance so the Halco lures dont really appeal to me anyway. 
 
I would like to add some Scorpions to my tackle box but as they would be purchased to be thrown into snags where they often wont come back it would need to be at a fishing lure price. As you said, perhaps I need to develope my carving skills and make my own. It gives me incentive at least.
Now you're on the right track, Al.  The satisfaction of catching fish on your own lures is immense.
 
I try to encourage all lure chuckers to make their own lures, which is the reason that I put together the lure making kits and the lure making article that Boothy published in Fishing Monthly.
 
I'm with you on the plastic lures. I wasn't trying to send you down to Big W to buy plastic lures, just making a point.  And it's ditto from me on the Halco Scorpions, for the same reason!Angry
 
Always happy to help anyone with lure making questions/problems.
 
Travers
Back to Top
cornboy888 View Drop Down
Senior Member
Senior Member
Avatar

Joined: 20 Mar 2011
Location: Dalby Qld
Status: Offline
Points: 289
Post Options Post Options   Thanks (0) Thanks(0)   Quote cornboy888 Quote  Post ReplyReply Direct Link To This Post Posted: 22 May 2011 at 9:04am
Hello Travers, I am one of those people who do not mind paying more for a lure that is hand made .   I recently bought a George Dempster 3 hook lure.  I read the story about this fellow on LL and the story behind the lure it`s origins- $1 an inch- supply cheap lures for kids etc and I reckon I paid for the lure and its  story of how it came to be. When I show this particular lure to my mates I go in to details  about pipeline George, $1 an inch, rare 3 hooker, mint condition and supply of lures for kids. It has been authenticated by captain cranky. It is the only Dempster Lure I own and to me it was worth the price I paid for it.  I would like to buy one of your  signed scorpions .  Pm me if that is possible....... regards Chris
Back to Top
Padgey View Drop Down
Industry Member
Industry Member
Avatar
Power Lures

Joined: 30 Jul 2010
Location: Nerang
Status: Offline
Points: 916
Post Options Post Options   Thanks (0) Thanks(0)   Quote Padgey Quote  Post ReplyReply Direct Link To This Post Posted: 22 May 2011 at 6:20pm

I have only started to sell my lures this year and my price is $25.00 for larger and $20.00 for smaller,and i can not keep up with the orders that i`m getting,this year i have sold more than 150 lures and the people who are buying them are over the moon with the quality and finish,and the fish that they are catching with them,timber is better,cheers bryan.

Back to Top
dingo View Drop Down
Senior Member
Senior Member
Avatar

Joined: 07 Jan 2010
Location: Ormeau
Status: Offline
Points: 194
Post Options Post Options   Thanks (0) Thanks(0)   Quote dingo Quote  Post ReplyReply Direct Link To This Post Posted: 22 May 2011 at 10:02pm
I carve my own lures and have often wondered, what price if I were to sell?.
I carve from a block of red cedar that my late grandfather gave to me(priceless) and every piece is used.Carving, sanding, bibs, numerous undercoats, color, tow points, split rings,hooks.
At what price?   For now my enjoyment comes from using my own lures and having success.
I don't own any Powell lures yet and I think they look great. If I were to buy one regardless of use I would expect to pay for the effort put into that lure.
Only Travis can  judge that.Clap
gdm
Back to Top
River Rover View Drop Down
Senior Member
Senior Member
Avatar

Joined: 04 Jan 2011
Location: Aberglasslyn
Status: Offline
Points: 753
Post Options Post Options   Thanks (0) Thanks(0)   Quote River Rover Quote  Post ReplyReply Direct Link To This Post Posted: 22 May 2011 at 10:03pm
I have to say Travers is actually short of the money on this one as I have over recent months been restocking my lure making gear and new paints to make some lures again and if you add up all the little touches from the shed that have been accumulated over the  years I am not sure that 12 to 15 dollars actually covers costs and that in NO way includes any labour component in the costing. To add these totals may well scare a lot of us out of the game or if our better halves had the figures heaven knows what may happen. Stick with it Travers I respect your works of art and as art are worth what people are willing to pay
David
Back to Top
Padgey View Drop Down
Industry Member
Industry Member
Avatar
Power Lures

Joined: 30 Jul 2010
Location: Nerang
Status: Offline
Points: 916
Post Options Post Options   Thanks (0) Thanks(0)   Quote Padgey Quote  Post ReplyReply Direct Link To This Post Posted: 22 May 2011 at 11:04pm
Like i said in the post i put up, i can get $25.00 a lure and i`ve been making lures for 3 years,selling for 5 months,Travers should be able to sell his for heaps if a time factor comes in to it,but i sell mine to fishermen,who use the lures to catch fish and you cannot put a price on that,even at $25.00 a lure i`m only working for about 7 to 8 dollars an hour,but i like making them and catching fish with the lures that i have made,and a major injury 6 years ago left me with not much of a work choice,a part from working for myself at home,fishermen don`t seem to care what the cost as long as it works and catches fish as  long as the better half don`t find out.People pay $25 to 30 dollars for 40mm bits of mass produced plastic with no heart or soul (or blood sometimes)that goes into making the hand made lures,it might sound a bit strange but every lure that i make i dont really want to sell it when its finished,but i do,cheers bryan.
Back to Top
doccod View Drop Down
LureLovers.com Fanatic
LureLovers.com Fanatic
Avatar
B.J.'s Spinnerbaits

Joined: 07 Feb 2010
Location: Harrington, N.S
Status: Offline
Points: 1324
Post Options Post Options   Thanks (0) Thanks(0)   Quote doccod Quote  Post ReplyReply Direct Link To This Post Posted: 23 May 2011 at 2:32pm
WinkWell I'm glad we've worked that one out now for my original question travers are you constructing the 75mm metal bibbed scorpions again and if so How much dollars for one or two???? I understand your strapped for time and do not wish to go back into scorpion territory full time so thats why I'm after only the one /two regards B.J.
Back to Top
Benparto88 View Drop Down
Unverified New Member
Unverified New Member
Avatar

Joined: 14 Jul 2019
Location: Inverell
Status: Offline
Points: 9
Post Options Post Options   Thanks (0) Thanks(0)   Quote Benparto88 Quote  Post ReplyReply Direct Link To This Post Posted: 14 Jul 2019 at 3:23pm

Sorry to bring up an old post guys, but would this happen to be one of those little tiny fellas?
Back to Top
Ducks View Drop Down
LureLovers.com Fanatic
LureLovers.com Fanatic
Avatar

Joined: 24 Feb 2012
Location: Point Clare
Status: Offline
Points: 2139
Post Options Post Options   Thanks (0) Thanks(0)   Quote Ducks Quote  Post ReplyReply Direct Link To This Post Posted: 14 Jul 2019 at 4:11pm
That's a plastic (injection moulded) scorpion from rmg.
I've picked up a few lately quite cheaply. I'll be fishing them.
Back to Top
Cranky View Drop Down
Member
Member
Avatar

Joined: 15 May 2020
Location: Woywoy
Status: Offline
Points: 17
Post Options Post Options   Thanks (0) Thanks(0)   Quote Cranky Quote  Post ReplyReply Direct Link To This Post Posted: 21 May 2020 at 7:16pm
Very nice Lures do you want to sell any of them?
Back to Top
ArdentAngler View Drop Down
Senior Member
Senior Member
Avatar

Joined: 21 Aug 2013
Location: usa,washington
Status: Offline
Points: 284
Post Options Post Options   Thanks (0) Thanks(0)   Quote ArdentAngler Quote  Post ReplyReply Direct Link To This Post Posted: 23 May 2020 at 3:29am
The whole pricing of handcrafted lures is both a controversial and cryptic topic. Like Padgey, River rover, and Dingo noted, the cost in materials and time alone push lures well beyond $12-$15 range. I believe the crux of this dilemma is edifying the average consumer what goes into a lure. In my personal opinion you can’t empathize the trials and tribulations unless you step in their shoes and make a few lures yourself. Travers Methodology hits it right on the head, if only more people got on board.
To touch on this subject, Powelly’s kit is an awesome idea that would give the insight which is so lacking outside this community. The simplicity of making a basic lure allows the mind to burgeon past that stagnant state. Everything he teaches outlines the work it takes for one ruddy lure. I truly doubt that an individual would moan about forking over $30 or more if they made one themselves. Taking this one step further, I was fortunate enough to get some lessons from Ollie in carving his cray…which I will take to my grave. Nope, wouldn’t want his job! The chops it takes is too much to produce that likeness is beyond me. Don’t know what he charges, but you have to be insane to complain. Same goes for Powelly, a while back he instructed me on carving a scorpion. These guys along with many others on this site give you your money’s worth and then some.
As for the murky waters, well…I believe pricing should be evaluated in accordance to materials, time, and fastidious attention to detail/effort. The carvers who create a highly intricate lure that functions as well as it looks deserve a bit more for their effort. You are paying for a handmade lure after all, and something that can be easily be displayed without looking tacky, well that’s hard to price. The guys on LL are top notch to say the least. Here in the states we have few carvers, and the majority pump out basic shapes. Not to say they aren’t making high quality lures, but it’s more of a lack of imagination. That could very well be the market, there are so many nuances that effect it that this is a really hard topic to pin down.
I am very interested in this topic as my materials, time and labor put me in a hole. My interest lies in the hobbyist who sells a few to recoup the tools/materials on their investment, or to make a bit of side cash. Mentioned this before, I have little interest in making a lure business or competing with the big dogs who carved out a niche long before me. On top of the work these guys do, the amount of hustling, sitting at booths to sell their product goes vastly unnoticed. To them I tip my hat. That’s more headaches than I can bear, so I wouldn’t dare steal food off their table. For me it’s about building a better lure and my honing skills, with a tinge of creating my own unique niche in this community.
By no means do I imply that the good folk on LL behave or think in this manner. I believe the community on here is well educated and breeds a great standard of ethics in general. I think the main point of this post is that the average bloke outside won’t pay x price.
Adding my 2 cents, selling lures can be like pulling stubborn teeth. The only individuals who chafe me are the low ballers who want, but can’t afford. A stereotype casted in frustration, thriving on derogatory insults to drive down the cost and effort of one’s work. These guys wouldn’t like it if you walked in their business and did the same thing to them. Sorry, $10-$20 doesn’t cover the materials, nor the time. Guess that would be like some bloke saying to Shane Love I’ll give you $13 for that hand carved lure, but no more. Don’t think that would end well for the random bloke?
I’m not on par with Shane, or a lot of the guys on here, but like most of you I put the time and effort in and hope to get better than average. Even at minimum wage my time alone would drive up the value past a big box store. I am confident that my lures would beat mass produced plastic any day along with the other gents on here.
Back to Top
horrorhead View Drop Down
LureLovers.com Fanatic
LureLovers.com Fanatic
Avatar
LureLover of the Year 2020

Joined: 14 Jun 2011
Location: Cooktown qld
Status: Offline
Points: 14008
Post Options Post Options   Thanks (0) Thanks(0)   Quote horrorhead Quote  Post ReplyReply Direct Link To This Post Posted: 24 May 2020 at 4:18pm
Well put Ardent AnglerClap
Martin-

you don't havta be pretty to fish
Back to Top
 Post Reply Post Reply
  Share Topic   

Forum Jump Forum Permissions View Drop Down

Forum Software by Web Wiz Forums® version 12.03
Copyright ©2001-2019 Web Wiz Ltd.